1/2" Dr. 1/2" Impact Socket

1/2″ Dr. 1/2″ Impact Socket

Genius Tools SKU:493816

SPECIFICATIONS
SAFETY INFORMATION

1/2" Dr. 6 pt. SAE Impact Sockets Cr-V

Item No.	A inch	D1 mm	D2 mm	Length mm	Weight G	PCS	G.W. kgs.	CUFT	Code @
493810	5/16	15	24	38	80	200	17.0	0.59	000210
493812	3/8	16	24	38	80	200	17.0	0.59	000210
493814	7/16	18	24	38	80	200	17.0	0.59	000210
493816	1/2	21	24	38	80	200	17.0	0.59	000210
493818	9/16	22	24	38	80	200	17.0	0.59	000210
493819	19/32	24	24	38	80	200	17.0	0.59	000210
493820	5/8	24	24	38	90	200	19.0	0.59	000210
493822	11/16	26	26	38	100	200	21.0	0.59	000210
493824	3/4	28	28	40	130	200	27.0	0.59	000240
493825	25/32	29	29	40	135	150	21.5	0.67	000265
493826	13/16	30	30	40	140	150	22.0	0.67	000265
493828	7/8	32	32	42	150	150	24.0	0.67	000300
493830	15/16	34	34	44	180	100	19.0	0.62	000360
493832	1	36	36	44	190	100	20.0	0.62	000400
493834	1-1/16	38	35	46	200	100	21.0	0.62	000445
493836	1-1/8	41	35	46	220	100	23.0	0.62	000565
493838	1-3/16	42	35	46	240	100	25.0	0.62	000565
493840	1-1/4	45	35	46	260	100	27.0	0.62	000620

â?¢ Always wear safety goggles and protective equipment while using any impact tool.

â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.

â?¢ Always use retaining ring and pin to hold socket on impact tool.

â?¢ Do not use damaged or worn sockets or accessories.

â?¢ Do not run the impact tool while placing the socket over the nut.

â?¢ Do not hold the socket or accessory while the tool is in operation.

â?¢ Do not continue to drive with an impact socket once the fastener is tight.

â?¢ Do not use hand sockets or accessories on impact tools.