24 Piece Metric Combination and Box End Wrench Set

  • SPECIFICATIONS
  • SAFETY INFORMATION

  • MS-024M
  • 24 Piece Metric Combination and Box End Wrench Set
  • Item No.
    Description
  • Item No.
    Description
  • Metric Combination Wrench (Mirror Finish)
    6mm Combination Wrench
    7mm Combination Wrench
    8mm Combination Wrench
    9mm Combination Wrench
    10mm Combination Wrench
    11mm Combination Wrench
    12mm Combination Wrench
    13mm Combination Wrench
    14mm Combination Wrench
    15mm Combination Wrench
    16mm Combination Wrench
    17mm Combination Wrench
    18mm Combination Wrench
    19mm Combination Wrench
    21mm Combination Wrench
    22mm Combination Wrench
  • Metric Box End Wrench (Mirror Finish)
    6 x 7mm Box End Wrench
    8 x 9mm Box End Wrench
    10 x 11mm Box End Wrench
    12 x 13mm Box End Wrench
    14 x 15mm Box End Wrench
    16 x 17mm Box End Wrench
    18 x 19mm Box End Wrench
    20 x 22mm Box End Wrench
  • Plastic Tray (1/2)

Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
3600 3 12.5 1.35 023200
  • â?¢ Always use wrench sizes which fit the fastener. Do not use metric wrenches on SAE fasteners, or vice versa.
  • â?¢ Always pull the tools toward you. Do not push. â?¢ Always use box-end as a primary choice and open-end as secondary where possible. Box-end secures the fastener better which help prevent slipping when using a wrench.
  • â?¢ Always ensure the wrench is securely fitted on the fastener and the adjustable wrench is adjusted to grip the fastener firmly before fastening.
  • â?¢ Do not use wrenches that are bent, cracked or badly worn.
  • â?¢ Do not overload a wrench by using pipes or other extensions to increase leverage or by striking with a hammer to gain extra strength. Doing so exposes sudden breakage and can result in bodily injury. Wrenches with extra-long or striking-face are designed for these purposes.
  • â?¢ Do not use a wrench if the fastener requires a specific torque. Instead, use a torque wrench to avoid under or over torquing.

  • Conversion Calculator

    =
    1