1/2″ Dr. 13/16″ Impact Socket Cr-Mo

1/2″ Dr. 13/16″ Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

1/2" Dr. 6 pt. SAE Impact Sockets Cr-Mo

Item No. A
inch
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
464010 5/16 15 24 38 80 200 17.0 0.59 000360
464012 3/8 16 24 38 80 200 17.0 0.59 000360
464014 7/16 18 24 38 80 200 17.0 0.59 000360
464016 1/2 21 24 38 80 200 17.0 0.59 000360
464018 9/16 22 24 38 80 200 17.0 0.59 000360
464019 19/32 24 24 38 80 200 17.0 0.59 000435
464020 5/8 25 25 38 90 200 19.0 0.59 000435
464022 11/16 27 27 38 100 200 21.0 0.59 000435
464024 3/4 29 29 40 130 200 27.0 0.59 000435
464025 25/32 30 30 40 135 150 21.5 0.67 000460
464026 13/16 31 31 40 140 150 22.0 0.67 000460
464028 7/8 32 30 42 150 150 24.0 0.67 000475
464030 15/16 35 30 44 180 150 28.0 0.67 000525
464032 1 37 30 44 190 100 20.0 0.62 000660
464034 1-1/16 39 30 46 200 100 21.0 0.62 000660
464036 1-1/8 41 30 46 220 100 23.0 0.62 000780
464038 1-3/16 42 30 46 240 100 25.0 0.62 000810
464040 1-1/4 45 30 46 260 100 27.0 0.62 000885
464042 1-5/16 46 35 46 290 50 15.5 0.41 001110
464044 1-3/8 49 35 48 330 30 11.0 0.34 001110
464046 1-7/16 50 35 48 350 30 11.5 0.34 001110
464048 1-1/2 53 35 48 400 30 13.0 0.34 001110
464050 1-9/16 55 35 55 410 30 13.5 0.34 001400
464052 1-5/8 57 35 55 440 30 14.5 0.34 001500
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.
  • Rubber Ring and Steel Pin Kits, 04417RP|Safety Spring Kits, 04617SP


    Conversion Calculator

    =
    1