1/2″ Dr. 30mm Impact Socket

1/2″ Dr. 30mm Impact Socket

  • SPECIFICATIONS
  • SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Impact Sockets Cr-V

Item No. A
mm
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
413808 8 15 24 38 80 200 17.0 0.59 000210
413809 9 16 24 38 80 200 17.0 0.59 000210
413810 10 17 24 38 80 200 17.0 0.59 000210
413811 11 18 24 38 80 200 17.0 0.59 000210
413812 12 20 24 38 80 200 17.0 0.59 000210
413813 13 21 24 38 80 200 17.0 0.59 000210
413814 14 22 24 38 80 200 17.0 0.59 000210
413815 15 24 24 38 80 200 17.0 0.59 000210
413816 16 24 24 38 90 200 19.0 0.59 000210
413817 17 26 26 38 100 200 21.0 0.59 000210
413818 18 27 27 38 110 200 23.0 0.59 000240
413819 19 28 28 40 130 200 27.0 0.59 000240
413820 20 29 29 40 135 150 21.5 0.67 000265
413821 21 30 30 40 140 150 22.0 0.67 000265
413822 22 32 32 42 150 100 24.0 0.67 000300
413823 23 33 33 42 170 100 18.0 0.62 000330
413824 24 34 34 44 180 100 19.0 0.62 000360
413825 25 36 36 44 190 100 20.0 0.62 000400
413826 26 37 37 44 190 100 20.0 0.62 000445
413827 27 38 35 46 200 100 21.0 0.62 000445
413828 28 40 35 46 210 100 22.0 0.62 000565
413829 29 41 35 46 220 100 23.0 0.62 000565
413830 30 42 35 46 240 100 25.0 0.62 000565
413831 31 44 35 46 250 100 26.0 0.62 000620
413832 32 45 35 46 260 100 27.0 0.62 000620
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

  • Conversion Calculator

    =
    1