1/2″ Dr. 19/32″ Deep Impact Socket Cr-Mo

1/2″ Dr. 19/32″ Deep Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

1/2" Dr. 6 pt. SAE Deep Impact Sockets Cr-Mo

Item No. A
inch
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
467810 5/16 15 24 78 120 140 18.0 0.44 000590
467812 3/8 16 24 78 120 140 18.0 0.44 000590
467814 7/16 18 24 78 120 140 18.0 0.44 000590
467816 1/2 21 24 78 120 140 18.0 0.44 000590
467818 9/16 22 24 78 130 140 19.0 0.44 000590
467819 19/32 24 24 78 130 140 19.0 0.44 000590
467820 5/8 25 25 78 140 140 21.0 0.44 000590
467822 11/16 27 27 78 150 120 19.0 0.52 000620
467824 3/4 29 29 78 180 120 23.0 0.52 000680
467825 25/32 30 30 78 190 120 24.0 0.52 000705
467826 13/16 31 31 78 200 120 25.0 0.52 000705
467828 7/8 32 30 78 220 60 14.5 0.45 000790
467830 15/16 35 30 78 260 60 17.0 0.45 000855
467832 1 37 30 78 300 60 19.0 0.45 000970
467834 1-1/16 39 30 78 340 60 21.5 0.45 001025
467836 1-1/8 41 30 78 390 50 20.5 0.62 001170
467838 1-3/16 42 30 78 430 50 22.5 0.62 001260
467840 1-1/4 45 30 78 500 50 26.0 0.62 001350
467842 1-5/16 46 35 78 500 50 26.0 0.62 001610
467844 1-3/8 48 35 78 570 50 29.5 0.62 001610
467846 1-7/16 50 35 78 600 30 19.0 0.52 001610
467848 1-1/2 52 35 78 600 30 19.0 0.52 001610
467850 1-9/16 55 35 78 590 30 19.0 0.52 001750
467852 1-5/8 57 35 78 600 30 19.5 0.52 001750
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.
  • Rubber Ring and Steel Pin Kits, 04408RP|Safety Spring Kits, 04608SP


    Conversion Calculator

    =
    1