1/2″ Dr. 14mm Deep Impact Socket Cr-Mo

1/2″ Dr. 14mm Deep Impact Socket Cr-Mo

  • SPECIFICATIONS
  • SAFETY INFORMATION
  • REPLACEMENT PARTS

1/2" Dr. 6 pt. Metric Deep Impact Sockets Cr-Mo

Item No. A
mm
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
447808 8 15 24 78 130 140 21.0 0.44 000590
447809 9 16 24 78 140 140 21.0 0.44 000590
447810 10 17 24 78 140 140 21.0 0.44 000590
447811 11 18 24 78 140 140 21.0 0.44 000590
447812 12 20 24 78 140 140 21.0 0.44 000590
447813 13 21 24 78 150 140 21.0 0.44 000590
447814 14 22 24 78 150 140 22.0 0.44 000590
447815 15 24 24 78 160 140 23.5 0.44 000590
447816 16 24 24 78 170 140 25.0 0.44 000590
447817 17 26 26 78 180 120 24.0 0.52 000620
447818 18 27 27 78 190 120 25.0 0.52 000650
447819 19 29 29 78 230 120 30.0 0.52 000680
447820 20 30 30 78 240 120 30.0 0.52 000705
447821 21 30 30 78 250 60 16.0 0.45 000705
447822 22 32 30 78 260 60 17.0 0.45 000790
447823 23 34 30 78 300 60 19.0 0.45 000855
447824 24 35 30 78 300 60 19.0 0.45 000855
447825 25 36 30 78 300 60 19.5 0.45 000970
447826 26 37 30 78 310 60 20.0 0.45 000970
447827 27 39 30 78 340 60 22.0 0.45 001025
447828 28 40 30 78 350 50 19.0 0.62 001170
447829 29 41 30 78 360 50 19.5 0.62 001170
447830 30 42 30 78 380 50 20.0 0.62 001260
447831 31 44 30 78 440 50 24.0 0.62 001350
447832 32 45 30 78 460 50 24.5 0.62 001350
447833 33 46 35 78 480 50 26.0 0.62 001550
447834 34 48 35 78 510 50 27.0 0.62 001610
447835 35 48 35 78 520 50 28.0 0.62 001610
447836 36 50 35 78 530 50 29.0 0.62 001610
447837 37 51 35 78 530 30 18.0 0.52 001610
447838 38 52 35 78 570 30 19.0 0.52 001610
447839 39 54 35 78 580 30 19.0 0.52 001750
447840 40 55 35 78 590 30 19.0 0.52 001750
447841 41 57 35 78 600 30 19.5 0.52 001750
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.
  • Rubber Ring and Steel Pin Kits, 04408RP|Safety Spring Kits, 04608SP


    Conversion Calculator

    =
    1