1/2″ Dr. 10mm Deep Impact Socket

1/2″ Dr. 10mm Deep Impact Socket

  • SPECIFICATIONS
  • SAFETY INFORMATION

1/2" Dr. 6 pt. Metric Deep Impact Sockets Cr-V

Item No. A
mm
D1
mm
D2
mm
Length
mm
Weight
G
PCS
G.W.
kgs.
CUFT
Code
@
417808 8 15 23 78 180 140 26.0 0.44 000335
417809 9 16 23 78 180 140 26.0 0.44 000335
417810 10 17 23 78 180 140 26.0 0.44 000335
417811 11 18 23 78 180 140 26.0 0.44 000335
417812 12 20 23 78 180 140 26.0 0.44 000335
417813 13 21 23 78 180 140 26.0 0.44 000335
417814 14 22 23 78 190 140 27.5 0.44 000335
417815 15 24 24 78 190 140 27.5 0.44 000360
417816 16 24 24 78 190 140 27.5 0.44 000385
417817 17 26 26 78 200 120 28.0 0.52 000405
417818 18 27 27 78 210 120 28.0 0.52 000420
417819 19 28 28 78 250 120 31.0 0.52 000450
417820 20 29 29 78 270 120 33.0 0.52 000495
417821 21 30 30 78 280 60 18.5 0.45 000495
417822 22 32 32 78 290 60 19.0 0.45 000520
417823 23 33 33 78 320 60 22.0 0.45 000545
417824 24 34 34 78 340 60 22.0 0.45 000570
417825 25 36 36 78 340 60 22.5 0.45 000685
417826 26 37 35 78 350 60 22.5 0.45 000765
417827 27 38 35 78 380 60 22.5 0.45 000765
417828 28 40 35 78 390 50 20.0 0.62 000825
417829 29 41 35 78 400 50 21.0 0.62 000825
417830 30 42 35 78 410 50 22.0 0.62 000825
417831 31 44 35 78 450 50 23.5 0.62 000885
417832 32 45 35 78 460 50 24.0 0.62 000885
  • â?¢ Always wear safety goggles and protective equipment while using any impact tool.
  • â?¢ Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury as well as wear to both the socket and the fastener.
  • â?¢ Always use retaining ring and pin to hold socket on impact tool.
  • â?¢ Do not use damaged or worn sockets or accessories.
  • â?¢ Do not run the impact tool while placing the socket over the nut.
  • â?¢ Do not hold the socket or accessory while the tool is in operation.
  • â?¢ Do not continue to drive with an impact socket once the fastener is tight.
  • â?¢ Do not use hand sockets or accessories on impact tools.

  • Conversion Calculator

    =
    1